Home

  Ento (Sales Equipment)
  31 Somers Street (Cnr of Somers & Salisbury Sts) off Berkshire Road Ph: (03) 9380 4944
  Sunshine   Vic   3020 Fax: (03) 9311 8415
  Email: [email protected]

A proud subsidiary of

B.K. Group Pty Ltd

 
 
 

double ended stock trolleys


The double ended stock trolleys are based on the standard six wheel stock trolleys and are made in different styles in sheet metal and tube. The sheet metal trolley is available in two sizes, the larger one can have drop down sides which can be folded down to form a flat platform or folded up individually to form a bin with three or four sides for bulky or awkward items. The smaller one has two positions for the top deck as shown on the following page. In addition to this, all these models can be fitted with removable top decks making them even more versatile. The designs and sizes are shown here.

 

TS/085 - Single Deck Double Ended Stock Trolley
TS/085 - Single Deck Double Ended Stock Trolley

TS/085 - Diagram


TS/086 - Double Deck Double Ended Stock Trolley
TS/086 - Double Deck Double Ended Stock Trolley

Note: The top for the large trolley (TS/095) is also available as a separate item.

TS/090 - Single Deck Double Ended Stock Trolley with Drop Down Sides
TS/090 - Single Deck Double Ended Stock Trolley with Drop Down Sides


TS/035 - Diagram

Note: TS/035 - Double End Tube Top deck is also available as a separate item.
  TS/030 - Double ended tube trolley is also available as a separate item.

TS/035 - Double Deck Double Ended Tubular Stock Trolley
TS/031 - Double Deck Double Ended Tubular Stock Trolley


Most of our stock trolleys are built with the top work area lower than normal work height. This is done to improve stability when the trolley is loaded and to make loading easier by reducing back strain and also so that the contents of the carton that is being worked on is at the correct height. This means that the work surface is low for some tasks such as trimming vegetables when used in the produce department. To overcome this, the double ended trolley shown here has two positions for the top deck, allowing the trolley to be used with the deck removed for moving large amounts of stock or with the deck in either of two positions to give the best height for the job.


TS/072 - Single Deck Double Ended Stock Trolley
TS/072 - Single Deck Double Ended Stock Trolley

TS/072 - Diagram


TS/073 - TOP DECK FOR 2 HANDLE TROLLEY 1140x460mm

The top deck for the two handled trolley is supplied as a separate item since it can be removed. This is suspended from the cross bar of the handle, the height of which is shown in the drawing to the right.

TS/073 - Top Deck For 2 Handle Trolley


TS/107 - WORK STATION WASTE BIN

The removable waste bin can be fitted to the end of the trolley to take packets and other rubbish such as vegetable scraps when restocking shelves. A polyethylene cutting board can also be supplied so that trimming can be done in the store.

TS/107 - Workstation Waste Bin

   

DISCLAIMER

The information shown in this document, including designs and related materials are the property of    Ento (Sales Equipment), or in the case of distributed products, the property of the original designer.  The details given herein are accurate to our knowledge.  Recommendations relating to the use of products are based on our experience and should not be taken as a guarantee of suitability.   In no event will Ento (Sales Equipment) be held liable for damages, lost profits or other special, incidental, consequential or indirect damages arising from the use of any of these products.   The information in this brochure is subject to change without notice.