Home

  Ento (Sales Equipment)
  31 Somers Street (Cnr of Somers & Salisbury Sts) off Berkshire Road Ph: (03) 9380 4944
  Sunshine   Vic   3020 Fax: (03) 9311 8415
  Email: [email protected]

A proud subsidiary of

B.K. Group Pty Ltd

 
 
 

hand trucks


There are two main considerations when selecting the right hand truck for a job. The first is what you wish to move or carry, the second is the type of surface you want to wheel over. To help meet the first point we manufacture a number of hand truck frames, the style and size of each are based on what they are intended to carry. To meet the second, we stock around 10 different types and sizes of wheels.

Most of the upright frames consist of two inverted "U" shaped side frames with different style backs depending on the intended use. This makes for a strong light weight trolley which is very comfortable to wheel. The following pages show the different standard frames and wheel types. The chart below gives the dimensions of the various frames and the chart further back in the brochure shows how the frames and wheels can be combined to give the most suitable trolley. If you still can’t find anything to meet your requirements, give us a call and we may be able to design something for you.

   
 

Height/Length

Toe Width

Toe Type

Toe Length

Comments

ET1

1050mm

260mm

Sheet

140mm

Light duty

ET1 HD

1050mm

260mm

Flat Bar

140mm

Light duty

ET1 LT

1050mm

260mm

Sheet

350mm

Long toe

ET4

1225mm

400mm

Sheet

285mm

Flat back

ET5

1360mm

300mm

Flat Bar

200mm

Tall narrow frame

ET6

1225mm

400mm

Flat Bar

225mm

Standard furniture type

ET7

1580mm

400mm

Flat Bar

225mm

Tall furniture type

ET8

750mm

375mm

N/A

N/A

Light frame

ET8L

940mm

375mm

N/A

N/A

Heavy frame

ET9

1225mm

400mm

Flat Bar

200mm

Pointed toe

ETFARM

1360mm

370mm

Flat Bar

300mm

Prong type toe

   


NOTE: Width across axle varies with some wheels but is normally 170mm wider than the toe.

   

The two trolleys which differ from the basic inverted "U" shaped frame are the ET1 and ET8. These are as follows:
     
ET1 - BIN TROLLEYS    

ET1/150
ET1/150

The ET1 hand truck is a small trolley with a traditional style frame. It is available in a choice of 3 toe styles.

ET1/150 Standard trolley with a 3mm sheet metal toe 140mm long.

ET1/150HD This trolley has a heavy duty toe made from flat bar and is 140m long.

ET1/150LT This trolley has a reinforced sheet metal toe 350mm long.

Note: The 150 in the code refers to the wheel type. For more details on wheel types, please refer to

ET1/150HD
ET1/150HD
ET1/150LT
ET1/150LT

ET8 - PIANO TROLLEYS    
ET8
ET8

The Piano Trolley is a heavy duty pipe frame and is available in 2 sizes, the large one also being a heavier construction. The sizes are shown in the chart on page 2-1. They both have 2 fixed axles allowing 4 wheels to be fitted for maximum load carrying capacity. The frame is placed under the load and is turned by raising one end off the ground. The top surfaces of the frame are covered with plastic hose to protect the load.

ET8/150
ET8/150
   
ET8/200
ET8/200
ET8/200PW
ET8/200PW

DISCLAIMER

The information shown in this document, including designs and related materials are the property of    Ento (Sales Equipment), or in the case of distributed products, the property of the original designer.  The details given herein are accurate to our knowledge.  Recommendations relating to the use of products are based on our experience and should not be taken as a guarantee of suitability.   In no event will Ento (Sales Equipment) be held liable for damages, lost profits or other special, incidental, consequential or indirect damages arising from the use of any of these products.   The information in this brochure is subject to change without notice.

 

TOP