Home

  Ento (Sales Equipment)
  31 Somers Street (Cnr of Somers & Salisbury Sts) off Berkshire Road Ph: (03) 9380 4944
  Sunshine   Vic   3020 Fax: (03) 9311 8415
  Email: [email protected]

A proud subsidiary of

B.K. Group Pty Ltd

 
 
 

SPRAY GUNS, HOSES & FITTINGS


SPRAY GUNS:

This section contains equipment for use in the meat preparation, fresh produce preparation and sales area. For this work we have a range of spray guns, hoses and fittings for washing down, cleaning and also for spraying vegetables to keep them looking fresh. The guns we use are high quality, heavy duty, industrial models, designed to withstand high impact and rough usage.

   
   

SE/005 - MEDIUM SPRAY GUN

The MEDIUM SPRAY GUN is manufactured with a nylon handle and has brass and stainless steel components throughout. The trigger has a short pull making it easy to operate and is fitted with a trigger lock which prevents accidental operation We fit this gun with an adjustable jet which allows it to be used with a fine mist spray to moisten fruit and vegetables, and also a hard spray to clean down cabinets and preparation areas. The inlet body has a 1/4" BSP thread.

SE/005 MEDIUM SPRAY GUN

   

SE/010 - VARIABLE PATTERN SPRAY GUN

This gun has the same basic design as the MEDIUM SPRAY GUN, but with the additional feature that the spray pattern changes as the trigger is pulled, from a fine mist, through to a full cone and then a solid stream. The gun has the same handle construction incorporating the trigger lock to prevent accidental operation and also the 1/4" BSP thread on the inlet body. This gun can withstand temperatures up to 150°C.

SE/010 VARIABLE PATTERN SPRAY GUN

   

SE/011 - HOT WASH SPRAY GUN

The HOT WASH SPRAY GUN is the same as the MEDIUM SPRAY GUN but, because a spray mist is not required, a cheaper fixed fan jet nozzle is fitted. When used with hot water, the nylon handle insulates the operator from the heat and the trigger lock stops accidental operation which could cause burns. The gun is designed to withstand temperatures up to 93°C.

 

SE/011 HOT WASH SPRAY GUN


HOSES:

We have a number of hoses designed for different tasks and they are as follows:
 
CODE NAME COLOUR DESCRIPTION
SE/040 8mm DIVERS HOSE Yellow Braided hose with non-toxic lining. Strong due to longitudal braids which makes it excellent for rough use.
SE/045 8mm ESTATE HOSE White Top grade garden hose suitable for external use for cold wash down. Light weight and flexible.
SE/050 8mm HOT WASH HOSE White with Red print Hot wash down hose suitable for temperatures up to 95°C. Designed for meat processing and general food industrial cleaning. Resistant to lactic acid, fat, blood and cleaning detergent.
SE/060 8mm SELF COIL HOSE Orange/Yellow Coiled PVC tubing for when hose has to be coiled up frequently such as a garden section. Prone to collapsing when bent to far and should always be connected using special fittings.
 
 

Couplings & Adaptors:  

SE/015 - PLUG IN ADAPTOR
SE/020 - COUPLING BODY

These two components are used to give a quick release connection of the spray gun to the water supply. Both components are fitted with valves to stop water flow once they are disconnected. The plug in adaptor is fitted to the hose and the coupling body to a convenient location on the cabinet. To connect the two together, push back on the locking sleeve, insert the adaptor as far as possible and then pull the sleeve forward. To prevent the hose from being disconnected, pull the lock ring forward and rotate until it holds. To disconnect, carry out the reverse.

 

SE/005 MEDIUM SPRAY GUN


SPRAY SYSTEMS:  


This gun has the same basic design as the MEDIUM SPRAY GUN, but with the additional feature that the spray pattern changes as the trigger is pulled, from a fine mist, through to a full cone and then a solid stream. The gun has the same handle construction incorporating the trigger lock to prevent accidental operation and also the 1/4" BSP thread on the inlet body. This gun can withstand temperatures up to 150°C.


 

SE/101
SE/101 - Hot Wash Spray Gun fitted with 20m Hot Wash Hose and Tap Fitting.

     
Code Gun Hose & Fittings
SE/070 MEDIUM SPRAY GUN WITH ADJUSTABLE CONE-JET FITTED WITH 4M DIVERS HOSE AND ADAPTOR
SE/074 MEDIUM SPRAY GUN WITH ADJUSTABLE CONE-JET FITTED WITH 15M DIVERS HOSE AND ADAPTOR
SE/080 MEDIUM SPRAY GUN WITH ADJUSTABLE CONE-JET FITTED WITH 10M SELF COIL HOSE AND ADAPTOR
SE/083 HOT WASH SPRAY GUN WITH LARGE JET FITTED WITH 10M HOT WASH HOSE AND 1/2" TAP FITTING
SE/090 MEDIUM SPRAY GUN WITH VARIABLE PATTERN SPRAY FITTED WITH 4M HEAVY DUTY HOSE AND ADAPTOR
SE/101 HOT WASH SPRAY GUN WITH LARGE JET FITTED WITH 20M HOT WASH HOSE AND 1/2" TAP FITTING
     
SE/070
SE/070
Standard spray gun with cone jet, fitted with 4 metres of divers hose and plug in adaptor.
  SE/080
SE/080
Standard gun with cone jet and fitted with 10 metres of self coil hose and plug in adaptor.
     

DISCLAIMER

The information shown in this document, including designs and related materials are the property of    Ento (Sales Equipment), or in the case of distributed products, the property of the original designer.  The details given herein are accurate to our knowledge.  Recommendations relating to the use of products are based on our experience and should not be taken as a guarantee of suitability.   In no event will Ento (Sales Equipment) be held liable for damages, lost profits or other special, incidental, consequential or indirect damages arising from the use of any of these products.   The information in this brochure is subject to change without notice.

 

TOP