Home

  Ento (Sales Equipment)
  31 Somers Street (Cnr of Somers & Salisbury Sts) off Berkshire Road Ph: (03) 9380 4944
  Sunshine   Vic   3020 Fax: (03) 9311 8415
  Email: sales@ento.com.au

A proud subsidiary of

B.K. Group Pty Ltd

 
 
 

stainless steel dollys


Because many work areas have high corrosion problems due sometimes to water and, in the case of meat processing, fat and blood, we manufacture a number of trolleys in stainless steel. Because of the high material cost of stainless steel, we also make equivalent trolleys to some of these in hot dip galvanised finish for lower corrosion areas. The trolleys are listed together here.

     

TSS/005

TSS/005 - THREE WHEEL STAINLESS STEEL BONE BIN DOLLY

To handle bone and fat in the meat room we have an 82 litre round plastic bin (XE/235). The bins can be mounted in this three wheel dolly to save injuries when moving them and to stop damage to floors through sliding. The dolly is manufactured from stainless steel and is fitted with three 125mm stainless steel castors to resist corrosion in the meat processing areas.

Three Wheel Stainless Steel Bone Bin Dolly Plan View

 
 
  TSS/011 - THREE WHEEL GALVANISED WASTE BIN DOLLY

This is the same basic trolley as the TSS/005 but in hot-dip galvanised finish for holding waste in lower corrosion areas such as produce departments.

 

 
 
 
Dolly - 3 Wheel S/Steel for 68 Litre Round Bone/Waste Bin TSS/003 - DOLLY - 3 WHEEL S/STEEL FOR 68 LITRE (15 gal.) ROUND BONE/WASTE BIN 

This dolly is the same detail as the standard TSS/005 but shorter to suit the smaller 68 litre bin (XE/230).

 

DISCLAIMER

The information shown in this document, including designs and related materials are the property of    Ento (Sales Equipment), or in the case of distributed products, the property of the original designer.  The details given herein are accurate to our knowledge.  Recommendations relating to the use of products are based on our experience and should not be taken as a guarantee of suitability.   In no event will Ento (Sales Equipment) be held liable for damages, lost profits or other special, incidental, consequential or indirect damages arising from the use of any of these products.   The information in this brochure is subject to change without notice.