Ento (Sales Equipment)
  31 Somers Street (Cnr of Somers & Salisbury Sts) off Berkshire Road Ph: (03) 9380 4944
  Sunshine   Vic   3020 Fax: (03) 9311 8415
  Email: sales@ento.com.au

A proud subsidiary of

B.K. Group Pty Ltd


six wheel sheet metal
stock trolley

Single Deck (Platform) 6 Wheel Trolley

Single Deck (Platform)
6 Wheel Trolley


Constructed from 1.6mm galvanised steel sheet for strength and durability, the flat deck and clean lines make it look good and allows small items to be carried loose on the trolley. Fitted with 200mm fixed centre wheels and 125mm swivel castors to each corner (with this design there is slight light rock from end to end built into the trolley to ensure that the centre wheels are always in contact with the ground). This provides a low push effort and good carrying capacity due to the large centre wheels as well as excellent manoeuvrability because of the swivel castors.

We have been building trolleys with this basic wheel arrangement since the business started in 1966 and it has been generally accepted as the most suited to the job.

The base is fitted with rubber buffers to front corners. The trolley is available in two sizes as a single or double deck as shown below. The single deck is for heavy load carrying (up to 450kg) and the double deck for stock filling or order picking. The work height of each of these trolleys allows them to do the job with the minimum amount of back strain for the operator. Late in 1992 a series of alterations were made to greatly increase the strength and therefore the life of the trolley as well as improve its appearance. The changes were all completed by early 1993, the most noticeable being the increase in size of the corner castors to 125mm and doubling the thickness of the top deck and inclusion of a buffer on its front corners.

  2 Tier (Double Deck) 6 Wheel Trolley

2 Tier (Double Deck)
6 Wheel Trolley


TS/065 TS/075 TS/070 TS/080


The information shown in this document, including designs and related materials are the property of    Ento (Sales Equipment), or in the case of distributed products, the property of the original designer.  The details given herein are accurate to our knowledge.  Recommendations relating to the use of products are based on our experience and should not be taken as a guarantee of suitability.   In no event will Ento (Sales Equipment) be held liable for damages, lost profits or other special, incidental, consequential or indirect damages arising from the use of any of these products.   The information in this brochure is subject to change without notice.